NEXTゼクトブレスをつくる！それはザビ―ブレスの進化系！ #特撮改造 #ヘイパウチ #仮面ライダー

NEXTゼクトブレスをつくる！それはザビ―ブレスの進化系！ #特撮改造 #ヘイパウチ #仮面ライダー

Highlight! The rotating gimmick is what you’d expect from The Bee. You can use the same method! The file’s performance is poor. It rotates. TOKUSATSU REMODELING EXHIBITION. Well, hello there! This is [Pouch]. I’ll be modifying it again today. This time, the target is a bracelet-type item like The Bee Zecter . In other words, I’m going to make a bracelet-type NEXT bracelet of this NE Quest Zecter Belt that I put out in the previous video. In this video, audio will be added to this, so you can’t miss the process. It’s exciting. I’m really looking forward to seeing what happens. If you have n’t subscribed to my channel yet, please click now. Don’t forget to click the like button too. I love this project to make original Zecters that look like they’d appear in Oneness One Scabut. I love it. Watch until the end. Let’s get started . First, this bracelet-type item from The Bevis Zecter. To put it in extreme terms, I think there are some people who think this is fine. I thought the same at first. This is a very old one, so the contact was really bad, but I applied a lot of contact cleaner and it still works perfectly. So it’s not a good idea to change it. First I want you to listen to the sound. The transformation is fine up to here, then you do a “papan” and tilt it a little, this sound is fine, “fuwah” this sounds good, cast off, that’s also okay, and then next is Wasp change, I say Wasp, Wasp, Wasp means 8th place, but this Wasp is really interesting, and then the special move is Rider Sting, it’s Rider Sting, the stab here and stuff, that’s what it means, if I leave it like this it’ll just be a Thebee exclusive item, so I’m going to make one after all, from the beginning, Thebee has a rotation gimmick, so I thought I could recreate the rotation gimmick with the Ride Watch , I pulled out the Ride Watch and turned it like this, but I completely forgot that it can only go 90 degrees, and I thought if I scraped it somewhere it would turn around, but if I scraped it I think the stopper would disappear So it’s going to keep spinning around and around, I think, so I thought that a Light Watch wouldn’t work this time, so I thought I’d make something round that could be rotated and fit on the arm, and I thought about it a lot.First up is the Sound Attack Flame Stacker, this is a pretty good shape, I think it would be good even if the Hibiki mark disappeared, but in this case, I need to think of a rotation gimmick with a different item, and then there’s the Sengoku Driver, which is also pretty good, see here, it’s like a protector, and if you turn it this way you can fit various things in here, and you can create variations with that, and there’s also a rotation gimmick, so I think I need to do something with a different item here, and so speaking of rotation, this is it, and here’s the Desai Driver, and if you attach this with a Bagon button, Just by pressing it, you can create a rotation gimmick. And just like the Z-Cutbell belt, this is a raise buckle holder that you can insert with a click. I thought it could be done using the same method. So first let’s disassemble this to make it thinner. Finally, I’ve made it this far. Oh, I have to explain it, but it’s possible that while I’m explaining it, everyone will run away and not be able to watch the video very well, so it’s quite difficult to make up my mind to explain it. Hmm, let’s disassemble it. Is it big? I see. Oh, I see. Wow, it looks like it’s going to fly off into the spring, which is scary. Can I take it off with this? Yes, yes. So, did I not need to remove this either? Ah, it was good to remove this. It was fine to just remove this part in the center. Oh , I see . So how far does this go? Ah, does this need to be removed? Ah, this is a gimmick for turning it. And this time, it doesn’t need batteries. It’s not a Desired Driver. All right, all right, all right. And [music] Ok, I got it. This makes it much neater. And, um, we don’t need this part to make it smaller. Yes, here we go. Jigsaw Chance. Let’s aim carefully. Definitely. Hey, this one is already nice and compact. These scraps are scraps, and if you put them together like this, it looks like you can use them somehow. It’s important in modification to use parts as efficiently as possible , so push, turn and secure. Push , turn and secure. Yes, this is the minimum. And we don’t really need much of the top part either. Let’s take this apart, too. Yes, I got it. Now if I remove this, oh, oh, in this state, should I cut this part too? Maybe. On this clear part, this is a duplicate of the raise buckle holder. Attach it like this and click I think this is good enough so that it can be done , so we don’t need this part, but it’s an attractive part so it might be usable for other thingsIt’s a little difficult to reach with pliers here, so how should I go with the top of the nose? Should I go diagonally down from here and go this way ? That means going straight here or sideways here, and the other side is the same, it’s fine, no, it came off nicely, this can be used, this can be attached, yay, so you put it on here like this and rotate it, for example, the power sensor is called a mount, but if you transform with a clamp , it fits in like this and rotates like this, it looks like this, I don’t think it necessarily has to be facing forward, this Zabi-chan has contralateral vision, so you just put it on here and rotate it So, the entrance will fit in from this side, and I think it would be best if we could make a depression here, so let’s try scraping it down a bit. Hand gouging – no, you can’t see the cutting part at all, I’m really sorry. Let’s melt it all down like this, and then forcefully pull it off with pliers and round the whole thing down one level. Then use the pliers to neaten up the edges and sand it down. It’s not really sanded so it won’t be that nice, but come on, go in. Push it in. Go in. Reinforce with a glue gun . Yes, it went in nicely. You’re working more seriously than usual today , aren’t you? I think it’s really nice. So, put it in like this, press the button, and click. Oh, isn’t it good? Isn’t it good? Special summer vacation project. Let’s hang things together with the pouch. East to west. It’s getting hot. Summer is approaching, isn’t it ? Well, we’re going to have a summer vacation workshop. First, on August 2nd or 3rd, maybe both, we’ll rent a space at my friend’s company called Monokushiji near Urawa Station in Saitama, and we’ll have them work for about 6 hours, from cutting out the materials to gluing them on and painting them. We ‘ll have to pay a reasonable amount for this, but we’re planning to have them make something pretty big, about 30cm x 50cm. We’ll also want to be able to listen to what the participants want to make and respond to that, so we’ll have it ready just in case. Then, on August 9th, Shikoku, we’ll have them cut out the materials, glue them on, and decorate them at Tanaka Printing in Higashikawa, Kagawa Prefecture . I’m thinking of a course of about 30 minutes. I think I’ll probably make a Buster Sword. Since it was popular in the workshops, both in the east and west, I think I’ll do a weapon gacha. Until now, gacha only had can badges, but you can win weapons, so I think I’ll prepare some. You can then decorate the weapon you win on the spot. It will cost extra, but I hope this will be something that people can do easily and casually. I will start taking reservations for the workshop in the first half of July . I will advertise it on all SNS and be sure to check the video description. I’m pretty excited about this summer vacation workshop. How about making it as a memory of your summer vacation? Making things is fun. Now that this bracelet is pretty much done, it’s time for Katsuri-chan. First of all, I’ll raise it so that the first Katsuri-chan can be fitted in. Let’s attach this recognition plate on the back here. Disassemble the plate. Will this all work ? This will be the back side, so if you do it the other way around, turn it like this, and instead of using your whole body to go in, you’ll have to go back a little, but is that okay ? This will secure the recognition plate that you disassembled earlier in two places with screws. It goes in, goes in, and if you turn it like this in this state, it will look like this. Done. This is a Rider-Da. It’s very romantic, and it’s really good. I think this is probably the end of the video, so I’ll just end it by having you listen to the audio. The rest will be next time. This is still a bit Sa-style with just this, so I’m looking for some more decorations. And then I’m going to put a circuit board into this Next Sect belt so that it makes a sound, and I’d like to hear that sound. Thank you for listening. This time, instead of Change Beetle and Change Wasp, I have changed them to bugs, which are small creatures in general. I say Change Bug in my voice, so please listen to that as well. First of all, I have left out the cast-off for the first one. I thought that there are probably more creatures that don’t shed their skin, so I left out the shedding element. However, if there are many opinions that say that they want to include shedding, I can rewrite the data as much as I want, so the voice may change next time depending on your opinions. Watsuk , yes, it’s like this. No, it’s interesting. So, this, I can finally make a belt. No, that’s amazing. Thank you, Nanami-chan. If you let me know, it’s because it’s Nami-chan. Yes, so I can’t take my eyes off the next one. Subscribe to the channel and wait. Did you like this video too? Please support my pouch by clicking the like button and subscribing to the channel. No, I love you, for watching the video until the end. In order to spread the word that making things is fun even more, we need the power of all our fans, our oneness. Making things you love and enjoying them. This is what happiness is, making things is fun.

🔵イベント情報🔵
夏休み特別企画！パウチと一緒にものづくり 西へ東へ
　　【東】
「夏休みワークショップ」
　日　　付：8月の第一週末(予定)
　イベント：ものくりデものづくり
　　　　　(パウチ単独イベントです!)
　場　　所：株式会社 ものくり商事 様
　　　　　　さいたま市浦和区仲町1-10-7
　　　　　　尾張屋第一ビル5F
　内　　容：武器づくり(未定)
－－－－－－－－－－－－－
　　【西】
「四国最大のものづくりフェス」に出店します！
日　　付：8月9・10日 (土,日)
イベント：CRASSO 2025/簡単ワークショップ～
場　　所：タナカ印刷株式会社様の敷地内
　　　　　香川県東かがわ市大内200-12
内　　容：柔らか素材などを使ってソフト武器つくり
　　　　　なにつくるかは考え中！

瀬戸内のものづくりを巡る旅
オープンファクトリーだけじゃない魅力をお届けします！
https://crasso-setouchi.jp/
━━━━━━━━━
特撮 改造エキシビジョンのグッズ発売中✨
https://suzuri.jp/kaizo_pauchi_shop

LINEスタンプ発売中☆
→ https://line.me/S/sticker/24178390
　　━━━━━━━━━
改造スタート イラスト提供「猫覆面」さんの情報
・Ｘ→https://twitter.com/nekohukumen
・pixiv→pixiv.me/nekohukumen
　　━━━━━━━━━
✨プレゼント・不要な玩具等の送り先✨
○送り先住所
〒336-0041
埼玉県さいたま市南区広ヶ谷戸１２０−１
ヤマト運輸 浦和大谷口営業所
○営業所コード
024823
○宛先
特撮改造エキシビジョン

⚠️注意事項⚠️
・お送りいただく前にSNSかメールでご一報ください🙏
・着払いは御遠慮ください🙏
・いただいたもの全てを使用させていただくことや、改造の指定を承る事は出来ませんので予めご了承ください。
・贈り物の紹介有無、紹介方法等の指定はご遠慮ください🙏
　　━━━━━━━━━
SNS他情報
Twitter → https://twitter.com/kaizo_pauchi
Instagram → https://Instagram.com/kaizo_pauchi
Threads → https://www.threads.net/@kaizo_pauchi
TikTok → https://tiktok.com/@kaizo_pauchi
　　━━━━━━━━━
ベルギー日本ハーフの僕「パウチ」が楽しく特撮変身アイテムを改造します！
仮面ライダー・ウルトラマン・スーパー戦隊・ゾイドワイルド・ナーフなどのアイテムを使います。
ぜひご視聴・チャンネル登録よろしくお願いします。
　　━━━━━━━━━
00:00　ハイライト　
00:20　本日の改造　
00:58　ザビ―ゼクター　
01:50　回転　
03:15　分解　
04:03　ジグソーチャンス！　
04:44　断捨離　
05:36　デンデンセンサー　
05:58　一段階くぼませる　
06:43　夏休み特別企画！　
07:55　カタツムリを改造　
09:11　変身音声　
　　━━━━━━━━━
★ベルギー人陶芸家である私の父の陶器はここで販売中
【ルックの陶の器】というネットショップやってます。
https://www.creema.jp/c/luc
よろしくお願いします。
　━━━━━━━━━
#仮面ライダーガヴ #kamenridergavv #仮面ライダー #kamenrider #tokusatsu #特撮改造 #ヘイパウチ #水嶋ヒロ #カブト #ガタックゼクター