カブトゼクターが進化！ゴッドクワガタで変身？！虫系の全アイテムで変身できる！ #特撮改造 #ヘイパウチ #仮面ライダー

カブトゼクターが進化！ゴッドクワガタで変身？！虫系の全アイテムで変身できる！ #特撮改造 #ヘイパウチ #仮面ライダー

Highlight! The masking tape is also yellow… Maybe it would be better without it? It’s so good! The Zero One Driver? The green lines… Cinderella fit! Just here… That’s all. TOKUSATSU REMODELING EXHIBITION. Now! It’s PAUCHI. Continuing from last time, we will continue the modifications. Next, we will finally move on to this Mushiking… Let’s fit this together. We don’t need this much thickness so let’s halve this. Let’s remove this. This part is enough. So it looks like this. Oh, it fits perfectly. Isn’t it amazing? This is amazing. Look, it’s almost solid. If you turn it up and down like this, it can be removed. It’s amazing, it’s interesting. Right now we’re using a fluorescent yellow raise buckle, but if it was originally red and the original color was red, I would believe you if you told me it was supposed to be like this. It fits just like that. Let’s hammer in two screws. OK, it’s here. It comes flying in, receives it, and clicks, it’s spectacular. Yes, yes, it fits in. Okay, okay, okay, okay. OK, okay. Let’s move on to the next step. Next is this ring button. This is the one that was originally attached to the Zecter, isn’t it? The early model, the early model , the first early model. Well, I’m going to say the early model, but looking at the balance of the early model, I thought about it a lot. I had this idea that it might be okay to attach a switch to the rider belt side, and that’s how it came to mind.I was given this already disassembled, thank you so much, it’s very helpful, I’m so happy, it’s a valuable part, so this switch here, this part on top doesn’t have to close with a snap, if you just press this part it will click, do you get it?That’s right, if there was a switch on top of this, I thought that you could click, click, click and activate a special move, or rather , that’s what I want to do.I also love this switch on the Fuze Driver, but if I stick it together like this it spreads out a lot, so I want to condense it into three places, and because it’s shaped, I want to make it straight, so the necessary parts are Okay, so this is all you need, right? With just the parts, it will stick together, so if you remove these parts so they don’t fly off, it will look like this, but I think you can just glue this together with a glue gun, and before the glue gun hardens , press your claws in tightly. Okay, so now it’s hardened. Okay, so let’s cut it up one by one. It looks like Cosmic Going, so it will fit better if we just wrap this cover part here, I’m sure. But how will it look when we put it here? Um, it will snap together like this, I think it will do Watous, but um, is it better without this? In the end, it seems like it would be better without it. The belt itself looks like it will act as a lid, so we don’t need it. We don’t need it, or rather , we’ll use it separately, with a different modification. It’s a great part, so I get it , I get it, I get it. Okay, so let’s mass produce three of these like this. Good. Yes, the three claws have been removed. All that’s left is to move them here. There’s a gap right here, so if this protrusion, the transparent protrusion, fits in there, I think it will be fixed in properly, so I’ll mark it with a hand dummy and melt and dig a groove where the two claws will fit in snugly. Will the claws go in? Alright, I’ll fix it firmly with the glue gun I’ve put on. It will work without any problems. Next, I’ll drive in a 5cm screw to make sure it doesn’t wobble. Oh, wow, this is a great spot. I fixed the click switch and screw with a glue gun. Now it won’t wobble at all. Now it’s solid and firm. I made a perfect pillar. What was it in the song for that pillar? The one that looks like Nishimatsu’s Kasumi Pillar. I really like that. It’s like this for now. I’ve got three here. I’m going to mask this arrow with click, and then I’ll paint this area like this with a brush, and make use of it. I think this will completely change the atmosphere again, so I’d like to change the atmosphere once and then think about other decorations.Let’s go to the paint booth.You can’t see that I’ve masked the arrow part, right?It’s a yellow arrow to begin with, and the masking tape is yellow too, so I don’t think you’ll be able to tell at all, but I did my best to mask it.Firstly, I’ll make the whole thing jet black.The image of the paint this time is Kabuto’s rider belt, so I’m going to paint it with the image of a more powerful version.But it takes a bit of courage to paint transparent parts jet black, doesn’t it?I was stuck and wondered what to do.So once I’d finished painting the whole thing jet black, I’ll then make the middle part silver.This first black was the base for the silver, right?It will come into play as a base and become a sophisticated silver, so the middle part and the three claws will also go over the silver, so I ‘ll make them black and silver, and finally It’s a red candy paint, clear red, which will give you a nice metallic red finish, and for this candy paint I went for 40. I painted it four times, and then I applied a paint called Tomaki. This is four layers, and I aimed for a candy texture. I don’t think it comes across in the video, but finally I painted the black parts with silver and red one more time to make them nice and smooth. I think it’s done properly this time, and finally I wiped off the diluted black to give it shine and flavor. It looks good. OK, let’s peel off the masking tape. I think it turned out pretty well. I usually say I don’t do it because it’s too much of a hassle, but when I do it, I do it. I said it myself, and it turned out to be blue. Now, from here, I’m going to roughly draw an arrow with a marker. It’s bumpy and three-dimensional, so it’s not accurate, but it looks like an arrow, kind of like this. I drew the remaining two arrows as well. Let’s get started.As I said before, drawing in three dimensions is quite difficult.I imagine a view from directly above and draw extended lines in my head, but the second line didn’t turn out so well.It’s okay, but basically the insect is perched so you can’t see it.Also, let’s draw some green lines.Just little things like this make it look a lot more like a beetle.It ‘s important that it’s easy for the viewer to understand, so if you line it up like this, it looks like this.I think black would have been better with the green around it, but it’s okay, I think this is good.Next, I want to add accordion lines to this.I removed the screws properly and removed it neatly from the CSM rider belt.I want it to be exactly in the middle, without going up or down, but if I do that, when I look at the back, it’s touching this point.So, okay, All you have to do is cut this, that’s all there is to it The other day, I have a mercenary who is a professional drummer, and he gave me this, and instead of going horizontally like a pliers, it goes vertically like this, and you can cut places like this with a snap, look, there are all kinds of tools out there, it’s interesting, this is great, it’s really good, it ‘s perfect, just insert two screws into the holes that were already open, and now the accordion is attached, it looks a lot like a belt, the desk is a mess, but I’m going to go with it, sorry , and when this bug gets in here, it’s the end, this is the end, I think about it, but first of all, this hand, this is just a part I like, it doesn’t mean anything, I don’t understand, I wanted to stop this, but next, this 01 The driver parts, the 01 has a strong grasshopper image so I thought it would be okay to connect it to insects, but it’s already a 01 driver , so the impression is too strong, so yeah, this one’s a no. Also, I really like this one too, my favorite frame , I wonder if I should attach this somewhere around here, I don’t know the direction, I don’t know the weapon, but when I hit it for a moment, I thought this double drive weave was too strong, so I decided not to include this one either, and as I thought about it, this one had a dangerous feel, and it had a dangerous feel to it, and I thought it would come together nicely, so let’s go with this, I think I’d like to use this pipe if I could use it, I don’t know, soldering, tig hazard level strong, melt it completely, it looks like this, maybe this one, which one is it, the upper left is cut diagonally so I thought it would fit the image better if the bottom right was cut diagonally as well, so I went with this one. Ok, this part is really cool too, so I’ll put it here. Let’s get started. Yes, I changed the color like this. What do you think? It looks really good. I’d be happy if One Starge comes along too. So, as for the sound for this , neither of them have any sound. I really wanted to make it make sound, so Na- chan told me about it and I bought a board on AliExpress. She said this board should be fine, and when it arrives I would like to add sound and incorporate it into this belt. This time I will add sound in the editing. Firstly, this flies out like this. It catches with a buzz and a click, which is great. Then, you can’t do the special move Watsugachan , but I think it was probably removed because it was inefficient. Also, I think it will probably be linked to Noha or some other technology, and if you want to kick it, The snap was just at the right time, and I think it was directly connected to the image.I think it was completed like that.As I said earlier, when I put together the base, I wanted to make it so that Kabutan can also be set here, and make it so that God 8 can stop on the breath type, and I would like to make various other modifications as well.Please leave a comment with your thoughts on this modification and your enthusiasm for Oneness’s Kabuto.Pouch , as grandma said, always reads all the comments.Did you enjoy this video too? Please support my pouch with the like button and subscribe to the channel.No, I love you, who watched the video until the end.In order to spread the word that making things is fun even more, we need the support of all our fans, Oneness.Make and enjoy what you love.This is what makes you happy.It’s fun to make things.

🟠パウチのイベント情報🟠
「パウチの冒険堂ワークショップ」やります！
日　　付：6月14・15日 (土,日)
イベント：しあわせBASE/簡単ワークショップ～
場　　所：元郷氷川神社内
　　　　埼玉県川口市元郷１丁目３０−２
内　　容：マチェットナイフやリストガードの装飾体験
　　　　　20分～30分でできる簡単ワークショップ
━━━━━━━━━
特撮 改造エキシビジョンのグッズ発売中✨
https://suzuri.jp/kaizo_pauchi_shop

LINEスタンプ発売中☆
→ https://line.me/S/sticker/24178390
　　━━━━━━━━━
改造スタート イラスト提供「猫覆面」さんの情報
・Ｘ→https://twitter.com/nekohukumen
・pixiv→pixiv.me/nekohukumen
　　━━━━━━━━━
✨贈り物・不要な玩具等の送り先✨
○送り先住所
〒336-0041
埼玉県さいたま市南区広ヶ谷戸１２０−１
ヤマト運輸 浦和大谷口営業所
○営業所コード
024823
○宛先
特撮改造エキシビジョン

⚠️注意事項⚠️
・お送りいただく前にSNSかメールでご一報ください🙏
・着払いは御遠慮ください🙏
・いただいたもの全てを使用させていただくことや、改造の指定を承る事は出来ませんので予めご了承ください。
・贈り物の紹介有無、紹介方法等の指定はご遠慮ください🙏
　　━━━━━━━━━
SNS他情報
Twitter → https://twitter.com/kaizo_pauchi
Instagram → https://Instagram.com/kaizo_pauchi
Threads → https://www.threads.net/@kaizo_pauchi
TikTok → https://tiktok.com/@kaizo_pauchi
　　━━━━━━━━━
ベルギー日本ハーフの僕「パウチ」が楽しく特撮変身アイテムを改造します！
仮面ライダー・ウルトラマン・スーパー戦隊・ゾイドワイルド・ナーフなどのアイテムを使います。
ぜひご視聴・チャンネル登録よろしくお願いします。
　　━━━━━━━━━
00:00　ハイライト　Highlight
00:20　レイズバックルと合体　Combined with raise buckle
01:28　必殺技発動スイッチ　Special move activation switch
04:28　塗装　Coloring
06:23　蛇腹ベルト　bellows belt
07:15　終着点　destination
08:32　NEXTライダーベルト　NEXT rider belt
　　━━━━━━━━━
★ベルギー人陶芸家である私の父の陶器はここで販売中
【ルックの陶の器】というネットショップやってます。
https://www.creema.jp/c/luc
よろしくお願いします。
　━━━━━━━━━
#仮面ライダーガヴ #kamenridergavv #仮面ライダー #kamenrider #tokusatsu #特撮改造 #ヘイパウチ #水嶋ヒロ #カブト #ガタックゼクター